spectralert? sp200 series cs-2454 10/21/04 page 1 of 2 description system sensor?s sp200 series speakers com- bine performance, func- tionality, and flexibility in a line of dual-voltage evacuation speakers. performance ? with its low total harmonic dis- tortion, the spectralert? sp200 series offers fi- delity-quality sound out- put. this provides greater assurance that the sp200?s output closely matches its source signal. this fidel- ity sound quality is achieved at any of the sp200?s four field-selectable power taps: 1/4, 1/2, 1, and 2 watts. functionality ? installation ease and functionality are achieved through the sp200?s compact design, which allows flush-mounting to a 4" x 4" x 2-1/8" (101.6 x 101.6 x 53.975 mm) backbox without an extension ring. flexibility ? the sp200 is designed for a variety of application require- ments. offered with round and square grilles, the sp200 can be mounted to either the wall or the ceiling. white and red grilles are available to meet specific aesthetic requirements. engineers specifications speaker shall be a system sensor model ______ dual-voltage transformer speaker capable of operating at 25.0 or 70.7 nominal v rms . speaker shall be listed to underwriters laboratories standard 1480 for fire protective signaling systems. speaker shall have a frequency range of 400 to 4,000 hz and shall have an operating temperature between 32f and 120f (0c and 49c). speaker shall have power taps which are selected by shunts. features fidelity sound quality. low-profile design; fits standard 4" x 4" x 2-1/8" (101.6 x 101.6 x 53.975 mm) backbox without ex- tension ring. four field-selectable power taps: easy to select and easy to change (1/4 through 2 watts). dual voltage settings: 25.0 and 70.7 volts. ceiling- and wall-mount applica- tions. grilles available in white and red. color-matched mounting screws. listings listings and approvals below apply to the basic spectalert? sp200 series dual-voltage transformer speakers. in some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. consult factory for latest listing status. ul listed: file s4048. csfm approved: file 7320-1209:186. mea approved: file 353-98-e. spectralert ? sp200 series dual-voltage transformer speakers spectralert? is a registered trademark and synccircuit? is a trademark of system sensor. 6710pho1.jpg
spectralert? sp200 series cs-2454 10/21/04 page 2 of 2 specifications and wiring information are provided for information only and are believed to be accurate. gamewell assumes no responsibility for their use. data and design are subject to change without notice. installation and wiring instructions shipped with the product shall always be used for actual installation. for more information, contact gamewell. gamewell 12 clintonville road northford, ct 06472-1610 phone: 203-484-7161 fax: 203-484-7118 www.gamewell.com a honeywell company ? 2004 gamewell specifications mechanical input terminals 12 to 18 awg (3.25 to 0.75 mm2). speaker size 4" (101.6 mm). grille size round: 7-3/8" (187.325 mm). square: 5" (127 mm). electrical voltage input 25.0 or 70.7 volts (nominal). frequency range 400 ? 4,000 hz. note: the sp200 series is ul listed from 400 to 4,000 hz, but will provide an output from 100 to 10,000 hz. operating temperature range 32 to 120f (0 to 49c). power 1/4, 1/2, 1, and 2 watts; field selectable. sound output voltage and power selection - example below selection of 1/4 watt input when a 25.0 volt (nominal) amplifier is being used. dba @ 10 ft. 2 w 1 w 1/2 w 1/4 w ul reverberant* 84 81 78 75 ul anechoic 87 84 81 78 product line information SP200W round, white, ceiling- or wall-mount applications, 7-3/8" (187.325 mm) grille, 1/4 ? 2 watt power, speaker voltage 25.0/70.7 v rms . sp201w square, white, wall-mount applications, 5" (127 mm) grille, 1/4 ? 2 watt power, speaker voltage 25.0/70.7 v rms . sp201r square, red, wall-mount applications, 5" (127 mm) grille, 1/4 ? 2 watt power, speaker voltage 25.0/70.7 v rms . mounting options 6710mt1.wmf both styles mount onto a standard backbox, 4" x 4" x 2-1/8" (101.6 x 101.6 x 53.975 mm), without an extension ring, as shown left and below. 6710mt2.wmf 6710sel.wmf
|
